Mazda MX-5 Miata NA: First-Generation History, Specs and Buyer’s Guide
The first Mazda MX-5 made a persuasive case for buying less car. The 1990 US-market Miata that Car and Driver tested weighed 2,210 pounds, had 116 horsepower and reached 60 mph in 9.2 seconds. Those numbers explain only part of its appeal. A low seating position, a compact body and a short gear lever made driving at ordinary speeds feel like an event. Today, the choice between two examples often comes down to the quality of the steel under the paint.
How Mazda brought back the affordable roadster
Mazda began considering a lightweight sports car in 1983, opened a production development project in 1986 and approved the design in 1987 after surveying consumers in California. It unveiled the MX-5 Miata in Chicago in February 1989. Japan got the Eunos Roadster in September. European sales followed in 1990 under the MX-5 name. The first generation is catalogued as the NA or Mk1 and commonly dated 1989–1998, although the last model year and the arrival of its NB successor varied by market. In the US, the NA ran through model year 1997.
Mazda took the basic proportions of earlier European roadsters and designed a car it could build in volume. The long bonnet, low cowl, small tail and pop-up lamps gave it a recognizable shape. The two-door, two-seat convertible came with a folding fabric roof. A removable hardtop was available; a car wearing one is still a convertible. The NB retained the basic two-seat, front-engine, rear-drive layout and switched to fixed headlamps. Mazda’s model chronology records the launch and early package changes.
1990 US Mazda MX-5 Miata 1.6 manual specifications
| Item | Figure |
|---|---|
| Engine | 1,598 cc naturally aspirated DOHC 16-valve inline-four |
| Power | 116 hp at 6,500 rpm (87 kW) |
| Torque | 100 lb-ft at 5,500 rpm (136 Nm) |
| Transmission and drive | Five-speed manual, rear-wheel drive |
| Length × width × height | 155.4 × 65.9 × 48.2 in (3,947 × 1,674 × 1,224 mm) |
| Wheelbase | 89.2 in (2,266 mm) |
| Test curb weight | 2,210 lb (1,002 kg) |
| Suspension and brakes | Independent double wishbones at both ends, four-wheel disc brakes |
| Instrumented acceleration | 0–60 mph in 9.2 seconds |
| Instrumented braking | 70–0 mph in 195 ft (59 m) |
| Revised US EPA fuel economy | 22 city / 28 highway / 24 combined mpg (US), about 9.8 L/100 km combined |
The performance measurements come from Car and Driver’s period test. The US EPA listing uses revised estimates that differ from the original figures cited in the road test. The metric conversion is for comparison only and uses the same US test basis. Weight, brakes, fuel economy and equipment can differ on later cars and in other markets.
Why the chassis mattered
The standard layout put the engine lengthwise up front and sent torque to the rear wheels. Mazda used a rigid powerplant frame between the transmission and rear differential. It helps control movement between those assemblies as torque loads change. Double wishbones at all four corners gave engineers control of how the wheels tilt as the suspension compresses. That arrangement, a short wheelbase and modest mass helped give the driver clear feedback without requiring a powerful engine or wide tires. Mazda’s engineering history explains the design decisions.
The original 1.6 used an iron block and aluminium cylinder head. Its torque peak was high enough that a downshift was often useful for passing. The five-speed manual was central to the experience, and a four-speed automatic was offered in selected markets. Equipment such as power steering, a limited-slip differential and anti-lock braking should be checked by year and market. On a car that has spent decades in enthusiast hands, the gearbox, differential, brakes and wheels may have been swapped.
For more on what happens inside a manual gearbox during a shift, read Kingly Car’s guide to synchromesh.
Miata, MX-5 and Eunos Roadster
The early Japanese 1.6 is associated with the NA6CE chassis designation. The Japanese 1.8 is associated with NA8C. Those designations are useful when shopping for an import or ordering parts, while North American VINs and European registration documents use their own identifiers. Treat the US figures above as applying to the tested configuration. The 1.8 became the US Miata engine for model year 1994. In the UK, the larger engine arrived around the same period and Mazda subsequently offered a lower-output 1.6 rated at about 88 bhp, according to Hagerty’s UK buying guide. Verify the original sales market, engine and transmission before comparing asking prices or ordering parts.
The cockpit has a low driving position, two seats and a narrow center console. Check your seating position with the roof up and with a hardtop fitted if you plan to buy one. Trim and conveniences varied. Some cars have manual windows and basic cloth, while special editions could add leather and wood trim. Japanese imports can have different plate recesses, instruments and packages. Ask whether the odometer reads in kilometres and how any conversion was recorded. Missing hardtop latches, trim and weather seals can turn a good-looking accessory into an expensive project.
Safety and recall checks
The early US Miata came with a driver airbag. Verify restraint equipment on the specific car and check for warning lights or evidence of aftermarket steering wheel installation. Keep modern crash ratings out of comparisons with this generation unless the test protocols are comparable. For US cars, start with NHTSA’s recall lookup and ask Mazda about older campaigns and completion records. For UK cars, use the government recall service and ask Mazda to check the chassis number. For EU and Japanese-market imports, check with the manufacturer or importer in the country of registration and ask about original-market campaigns. A lookup that returns no result for an older or imported VIN leaves its campaign history unresolved.
What to check before you buy
- Inspect the structure on a lift. Look closely at the rear sill ends, rear wheel arches, floors and jacking points. Check for filler, poor welds and fresh underseal concealing corrosion. Ask for photos and invoices for completed repairs.
- Look for water entry. Feel the carpet behind the seats and check the boot for dampness. Examine the top, rear window and seams. Have the roof drains and drain channels checked where dampness is present.
- Ask for a cold start. Check idle quality, leaks and the service history for the timing belt and cooling system. Early 1.6 cars have a known crankshaft nose and keyway concern discussed in specialist buying guides. Visible pulley wobble warrants a specialist inspection. Ask who performed previous timing-belt work.
- Drive it through its normal warm-up. Check for clutch slip, gear engagement when cold and warm, brake pull, steering play and driveline noise. Old tires or changes to ride height and alignment can mask how the chassis is meant to feel. Compare how the car tracks on the road with its tire wear.
- Verify the parts you would need. Price mechanical service items and check lead times for body panels, specific trim, hardtop hardware and import-specific parts. Mazda documented an NA parts supply and restoration initiative in Japan. Local inventories and eligibility differ. Mazda’s technical report on the restoration program describes its scope.
Start maintenance planning with the manual for the car’s market and engine. An invoice with mileage and the parts fitted carries more weight than a seller’s recollection. An enthusiast’s report of a noisy gearbox or oil leak can help you form questions, while an inspection can show what is actually wrong with the car. For a collector, original equipment, paint, paperwork and matching market-specific details matter. For regular use, a structurally sound car with documented maintenance and reversible modifications can be the better purchase. Get a written repair estimate before paying a premium for a special edition with corroded sills.
Comments
Post a Comment